ResMed AirFit N20 and N20 Classic Disinfection and Sterilisation Guide Sept 2017

Disinfection and Sterilisation Guide

6 Pages

Disinfection and sterilisation guide  Clinical use only  This guide is intended for multipatient use of the AirFit N20 / AirFit N20 for Her ResMed nasal mask in a sleep lab, clinic or hospital. If you use the mask as a single user in the home, refer to the User Guide for cleaning instructions. This guide describes ResMed’s recommended and validated procedures for cleaning, disinfection and sterilisation of the mask in accordance with ISO17664.  AirFit N20 / AirFit N20 for Her mask component1  Thermal disinfection Manual  Chemical disinfection AWD  CIDEX OPA  4  ™  Anioxyde 1000  Sterilisation Gigasept FF  STERRAD 100S  STERRAD NX  • Cushion  Validated number of cycles2 30  • Magnetic clips  –  –  • Elbow and short tube3  –  –  • Frame  –  • Headgear  –  –  –  30 30  –  –  30  –  –  30  This mask may not be available in all regions. For full details regarding the correct use of these masks, please refer to the specific User Guide. For a list of available replacement parts for each mask system, check the Components Card on If a healthcare facility requires an additional disinfection or sterilisation cycle after reassembly, the number of validated cycles must be halved. 3 The elbow and short tube are not separable. 4 Automatic Washer-Disinfector 1 2  B  A  C  D  2  7 1  3 4  6 5  8  A  Elbow and short tube  1  Elbow  2  Side buttons  3  Vent  4  Short tube  5  Swivel  B  Frame  C  Cushion  D  Headgear  6  Magnetic clips  7  Lower headgear straps  8  Upper headgear straps  A+B+C  Frame system  A+B+C+D  Complete system English  1
File Type: PDF
File Size: 315 KB
File Name: 608464 ResMed AirFit N20 and N20 Classic Face Mask Disinfection and Sterilisation Guide Sept 2017.pdf

By clicking Download you are confirming this is the correct document for your purposes
and that you agree to our Terms & Conditions